Follow

How-to Connect fotoShare to dslrBooth or LumaBooth

fotoShare downloads images directly from dslrBooth or LumaBooth if both are on the same network. This is the preferred way of using fotoShare.

Normally to use fotoShare with our photo booth apps, you'll need to connect both of them to the same network. The easiest way to do this is to connect to the same Wifi Network. However, you should never rely on connecting to a venue's WiFi directly as the large majority of them venues block communication from different devices on the network such as dslrBooth on a PC (or LumaBooth on iPad) and fotoShare on the iPad for security reasons.

There are several options we recommend in this order:

  1. 4g MiFi Device
    Use your own 4g MiFi device from a wireless carrier. Test to make sure the device enables communication between wireless clients connected to it. This might be a configuration option in the MiFi device.
  2. Your Own Access Point
    The ideal setup is to have your own wireless Access Point that you control and bring with you. Get a hardwired connection from the venue and use your own wireless access point. Connect the computer and the iPad to your access point using either a wireless or wired connection.
    1. Wireless: Your PC/Mac/iPad running dslrBooth or LumaBooth as well as your iPad running fotoShare would connect to your access point's WiFi. 
    2. Wired: In conventions and other very crowded events, another option is to connect the PC and computer to your network using a wired Ethernet connection. You can use an Apple USB Ethernet Adapter to connect your iPad to your network. You'll also need the Apple Lightning to USB Camera Adapter. Connect the iPad to the Camera Adapter, connect the Ethernet Adapter to the Camera Adapter, connect your charging cable to the camera adapter, and finally connect an Ethernet cable to the Ethernet adapter. For permanent installs, checkout these alternative ethernet adapters.
  3. Use Computer as Hotspot
    An alternative way to connect to a venue's WiFi is to connect computer directly to a venue's WiFi then iPad connects to your computer which acts as a hotspot.
  4. Hardwired Connection to the Internet with Own Access Point
    Get a hardwired connection from the venue and use your own wireless access points. Connect your devices to your access point.
  5. Travel Router
    Use a wireless router (travel router) that can act as a client and connect to the venue's WiFi while serving as an access point and your PC and iPad would connect to your own access point.

If none of these are possible then fotoShare will download your prints from dslrBooth's servers provided that your photo booth app (dslrBooth or LumaBooth) have access to the internet. dslrBooth must have Enhanced Sharing turned on. fotoShare on the iPad must have internet access as well. This method will be much slower and will largely depend on your internet speed.

Having issues? Read our Troubleshooting Guide

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.